Cyber Forensic Products 

Forensic Solutions
Super DriveLock eSATA Express Kit

 
  

Super DriveLock as a Stand Alone or in Bay, is all you need to do the job!

*Hard Drives not Included* Since some hard drives, when attached to the SDL, will not be recognized when connected to native SATA ports on some PC’s, ICS recommends the use of the E-SATA controller card to ensure 100% compatibility with both the PC and the drive connected to the SDL. Besides guaranteed drive detection the E-SATA controller supports “hot swap”.

The Super DriveLock eSATA Express Kit includes the basic Super DriveLock Kit as well as an external Power Supply, USB-to-S-ATA Adapter, eSATA PCI Express Controller Card and a Hard Case



Price: $1,250.00  QTY
Product Number: F.GR-0029-000A

Prices in $ are for purchase and delivery within the USA only.

For international sales please contact our Distributors world wide and they will be happy to quote and support your ICS products.

The Super DriveLock is the only blocker in the market today that prevents accidental writes to Hard Drives combining so many interfaces in one single device. As stand alone or in-Bay, the Super DriveLock supports IDE 133 drives, SATA II drives with 3Gbit/sec, SCSI drives with 320 MB/sec, and USB 2.0 storage with 480 Mbit/sec.



Features 

.: Multi Media Write-Protect Support: Built-in USB 2.0, P-ATA, S-ATA and SCSI interfaces provide native write protect support for USB, P-ATA, S-ATA, and SCSI devices. Supports SCSI interfaces such as Ultra-160 and Ultra-320, including SCSI Narrow (50-pin), SCSI Wide (68-pin) and SCSI-SCA80 (80-pin). Supports 3.3v devices.

.: High Speed Operation: Transfer rates can exceed 3.5GB/min

.: Multiple O/S Host Support: Supports Windows XP, Windows VISTA and Linux.

.: Upgradeable Firmware: The unit's firmware can be easily upgraded using the PC's interface.

.: Multiple Host Interface Support: Unit can be connected to the PC or Notebook using multiple interfaces such as native S-ATA port, eSATA controllers, eSATA CardBus adapters.

.: Portable: Can be used as a portable device or mounted in a PC available drive bay.

.: HPA/DCO Support: Detects HPA and DCO areas

.: 3.3v Device Support: Provides output for devices which require 3.3v for operation.

.: Status leds: 4 leds; IDE drive detected, SATA drive detected, SCSI drive detected, USB device detected 

Optional Hardware

.: eSATA PCI Controller Card: Provides a “hot swap” eSATA interface to connect the Super DriveLock with the PC.  Installs in a PC’s available PCI Slot.
.:In-Bay Drive Tray and Cooling Fans: The "In-Bay Drive Tray" is designed for the use with the Super DriveLock and Super DrivePort when the devices are mounted in an available PC drive bay. Cooling fans are provided to keep the drives operating at proper temperatures. 

Specification 

Super DriveLock eSATA PCI Express Kit

Each kit includes:

(1) Super DriveLock Unit
(1) External USB Device Data Cable
(1) S-ATA Data/Power Cable
(1) 8" P-ATA /SCSI Power Cable
(1) 6" S-ATA 3.3v/5v Power Cable
(1) 6" S-ATA Data Cable
(1) 6" SCSI Data Cable
(1) SCSI Terminator
(1) 5" P-ATA Data Cable
(1) eSATA to S-ATA Data Cable
(1) USB A to A F/W Upgrade Data Cable
(1) eSATA to eSATA Data Cable
(1) 36" P-ATA/SCSI Power Cable
(1) SCSI Narrow Adapter
(1) SCSI SCA80 Adapter
(1) 18" P-ATA Data Cable
(1) External Power Supply
(1) USB to S-ATA Adpater
(1) eSATA PCI Express Controller Card
(1) Hard Case
Warranty Documents


Super DriveLock unit specifications:


.: Maximum Possible Power: 9 watts typical operating ( not including hard disk)
.: Stand by Power: 5 watts
.: Supply Voltage (DC IN): +VDC @ 2A, +12VDC @ 2A ( includes budget for hard disk)
.: Output voltage (DC OUT): +5VCD @ 1A, +12VDC @ 1A
.: Dimensions: 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)
.: Weight: 1 lb
.: Operating temperature range: 0 to 55 degrees C (no air flow)
.: Storage temperature range: -40 to 70 degrees C
.: Relative humidity: Up to 90% (non condensing) 

Compatibility 

.: SATA Devices: SATA 150 or SATA 300 hard disk devices

.: IDE Devices: Supports the USB 2.0 or FireWire 1394B specifications for High Speed operation.

.: Hot Swap Capability: Parallel ATA hard disk devices with LBA ( Logical Block Addressing) support

.: SCSI Devices: From SCSI-1 to Ultra-320 with connection: Narrow (50P), Wide (68P), SCA80 (80P)

.: USB Devices: High speed 2.0 or USB 1.1

.: Host Interface: SATA, USB 2.0

.: Host O/S: Windows XP, 2000/VISTA, Macintosh OS, Solaris, Linux




-----------------------------------------------------------------------------------------------------------------