|
Features:
.:
MD5/SHA-1/SHA-2 and CRC32 Hashing: Simultaneous CRC32 and MD5/SHA-1/SHA-2*
hashing generation can be performed during the data capture.
.: Touch Screen User Interface: The unit’s advanced Touch Screen User Interface and
programmed keyboard provides for ease of use.
.: High Speed
Operation:
Data transfer rates can exceed 3GB/min.
.: Built in Write
Protection:
Suspect’s data is protected with built-in write protection.
.: Built in FireWire
1394B and USB 2.0 Interface: Seize data from a Suspect’s unopened Notebook or PC.
Also, safely preview the Suspect’s drive while connected to
the IMSolo-3 Forensic unit's write protected port.
.: Captures to Two
Evidence Drives Simultaneously: Seize data to two hard drives simultaneously at high
speeds, without speed reduction. Data from SATA, IDE and SCSI
drives can be captured.
.: Multiple Capture
Methods:
Seize in a Forensic sector-by-sector format method or using a
segmented file format method (Linux-DD) which allows seizing
multiple images to one Evidence drive.
.: WipeOut: Sanitize drives at speeds greater than 3GB/min.
.: Audit Trail and
Logs:
Detail operational event log information can be printed or saved
to Compact Flash.
.: Multiple Media
Support:
Supports data transfer between P-ATA, S-ATA and SCSI hard disk
drives. Also supports flash media devices and Notebook drives.
.: Hard Case: The kit comes with a hard case. Store, the
ImageMASSter Solo-3 Forensic, and any additional accessories,
all in one place.
.: Fast SCSI: Allows you to capture directly from one
SCSI drive to another SCSI drive at transfer rates exceeding 4GB
per minute. Supplied adapters will also allow capture
from SCSI to P-ATA or S-ATA drives.
.: eSATA:
Supports eSATA drives with the purchase of a SATA-to-eSATA data
cable
* Hashing can be
performed with MD5, SHA-1 or SHA-2 but not simultaneously.
-----------------------------------------------------------------------------------------------------------------
Software
:
The
following Software features come standard with the ImageMASSter
Solo-3 Forensic Kit unit:
.: Device Configuration Overlay (DCO) Option:
DCO can be used to hide and protect a portion of the drive’s
area from the operating system and file system. If DCO is
detected on a Suspect’s drive, the Solo-3 Forensic's
seizure operation will capture the DCO hidden sectors.
.: Host Protected Area (HPA) Option: An HPA
area may exist on a drive, hiding a certain portion of the
drive’s contents from the operating system and file system.
If an HPA area exists on a Suspect’s drive, the IM Solo-3
Forensic's seizure operation will detect and capture this area.
.: WipeOut DoD Option: WipeOut was designed to
meet the U.S. Department of Defense specification DOD 5220-22M
regarding the sanitization of hard disk drive data. Three
iterations are performed to completely erase the contents of a
hard disk drive. Each iteration makes two write passes
over the entire drive.
.: WipeOut Fast Option: The Wipeout Fast option
provides a quick non-DoD method of sanitizing a drive of all
previously stored data.
.: LinkMASSter Application: The LinkMASSter
application, combined with the unit’s built-in FireWire/USB
interface, provides a fast and effective solution for seizing
drive data from a Suspect’s unopened PC or Notebook to an
Evidence drive connected on the IM Solo-3 Forensic unit.
.: Linux-DD Capture Option: The LinuxDD Capture
option captures data as individual “LinuxDD” segmented
files. This option also allows multiple seizures to be
performed using the same Evidence drive.
-----------------------------------------------------------------------------------------------------------------
Optional
Software
.: Solo
3 Forensic Mac Option: the software allows the user to copy unopened Mac's computer, sector
bysector, with the highest standards of verifications -
MD5/SHA-1/SHA-2.
.: Solo
3 Forensic IQCopy Mode Option: the NEW IQCopy Mode Software
Option for Solo-3 Forensic unit provides an
"intelligent" method of copying and scalling
partitions
-----------------------------------------------------------------------------------------------------------------------
Optional
Hardware
.:
Notebook
Adapters:
ICS proprietary Notebook drive adapters enables the IM Solo-3
Forensic to support a variety of Notebook models.
.:
DVD
R/W DRIVE: The DVD R/W Drive is used for
archiving data to DVD recordable media. The media
supported includes DVD -RW, DVD +RW, DVD +R, DVD –R, and CD-RW
media.
.:
CF
Adapter: The Flash adapter was designed to
support 50-pin micro-drive devices.
.:
Hard
Drive Coolers: Protect hard drives from EMI
noise and reduce the hard drive heat.
.: eSATA:
Supports eSATA drives with the purchase of a SATA-to-eSATA data
cable
.:
Micro
S-ATA 3.3V, 1.8" adapter: The
Micro S-ATA 3.3V adapter can be used to convert from the
standard 5V S-ATA 22-pin interface to the 3.3v Micro S-ATA
16-pin interface used by Micro S-ATA drives.
-----------------------------------------------------------------------------------------------------------------
Specifications
.:
Supply Voltage:
90 - 230V / 50 - 60 Hz
.:
Power Consumption:
10W without drives
.:
Operating Temperature:
5 degrees - 55 degrees C
.:
Relative Humidity:
20% - 60% non-condensing
.:
Net Weight:
2.2 lbs
.:
Overall Dimensions:
8.3" x 5.8" x 2.2"
.: Power Supply:UL and
PSU Certified and Universal Auto-Switching input voltage
-----------------------------------------------------------------------------------------------------------------
Hardware
Included
The
ImageMASSter Solo-3 Forensic Kit consists of:
.: ImageMASSter Solo-3 Forensic unit.
.: IM
Solo-3 Forensic hard Case: The kit comes with a hard case. Store the
ImageMASSter Solo-3 Forensic unit and any additional
accessories, all in one place.
.: Fast
SCSI : Allows you to capture directly from one SCSI
drive to another SCSI drive at transfer rates exceeding 4GB per
minute. (Also support capture to 2 SCSI drives).
.: SCSI
to SATA Adapter: Allows you to capture directly from
one SCSI drive to another SATA drive.
.: SCSI
to IDE(P-ATA) Adapter: Allows you to capture directly from
one SCSI drive to another IDE drive.
.: S-ATA
3.3V Device Support Kit: The ICS S-ATA
3.3v Device Support Kit provides IM Solo-3 support for 3.3v
devices which use the S-ATA interface
|
