|
Connectors:
Host Side
|
|
eSATA
|
One
eSATA
|
FireWire
|
Two
9-pin FireWire800 (1394B)
|
FireWire
|
One
6-pin FireWire400 (1394A)
|
USB
|
One
USB Mini-B (5 pin, USB2.0 high/full/low speed)
|
DC
Input
|
DC
In A: 4-pin male "drive power" connector
DC In B: 5-pin Mini-DIN connector for use with Tableau TP2
power supply
|
|
Connectors:
Device Side
|
|
SATA
|
SATA
Signal Connector
|
IDE
|
IDE
Signal Connector
|
DC
Output
|
4-pin
male "drive power" connector (power to SATA or
IDE hard disk)
|
|
Switches
|
|
DC
Input Select
|
Selects
between DC In A and DC In B Sources
(functions as source ON/OFF when one DC In source
connected)
|
DIP
Switch
|
4-position
DIP switch selects field-configurable options
(DIP Switches can be accessed by removing a knock-out
panel on the side of the T35e case)
|
|
Other
Features
|
|
Status
LEDs
|
8
LEDs: DC IN A good, DC In B good, Power ON, IDE drive
detected, SATA drive detected, Host connected, Write-block
enabled, Drive activity
|
Factory
Configuration
|
Black
Paraben case units are configured as read-only (model
T35e)
|
|
Compatibility
|
|
SATA
Devices
|
SATA
1 or SATA 2 hard disk devices
|
IDE
Devices
|
Parallel
ATA hard disk devices with LBA (Logical Block Addressing)
support
|
Host
Interface
|
FireWire800/400
or USB 2.0
|
Host
O/S
|
Windows
XP/2000/newer, Macintosh OS X, most Linux distributions
(note: Linux distributions have varying levels and quality
of support for FireWire 1394 A/B and USB2.0)
|
|
Physical
/ Environmental
|
|
Power
|
3.5
watts typical operating (not including hard disk)
|
Supply
voltage (DC IN A/B)
|
+5VDC
@ 2A, +12VDC @ 2A (includes budget for hard disk)
|
Output
voltage (DC OUT)
|
+5VDC
@ 1A, +12VDC @ 1A
|
Dimensions
|
5.75
in. (L) x 3.25 in. (W) x 1.125 in. (H)
|
Weight
|
5.4oz
(153g)
|
Operating
temperature range
|
0
to 55 degrees C (no airflow)
|
Storage
temperature range
|
-40
to 70 degrees C
|
Relative
humidity
|
Up
to 90% (non-condensing)
|
|
Warranty
|
One
years parts and workmanship from date of purchase
|
|